INEX > EXPRESS
Rough Side – Paint & Stain Systems
In partnership with a number of coatings companies UBIQ has identified a large number of approved coatings systems.Simply navigate through your selected UBIQ Products to your selected paint, stain or render coat system to find our approved application.
The rough side texture of INEX>EXPRESS is part of its intrinsic quality. It comprises a grain similar to 40 Grit sandpaper and will include a number of pinholes, and for this reason we recommend the following general guidelines to painting:-
Sand back any counter sunk / filled fixing points with a 40 Grit sand paper in the direction of the grain only. This will minimise these locations ‘grinning through’ your fully painted or stained wall.
For paint finishes, apply by spray. This will fill any pinholes or deeper textures that are on the surface.
Whereas we have seen significant success in the finishes achieved using these coatings/stains on INEX>BOARDS when applied as outlined by the manufacturer, the coatings/stains are not an INEX> product and therefore not guaranteed or warranted in any way by UBIQ Pty Ltd. Please consult the manufacturer for warranty and other information about their products.The recommendations and guides provided by UBIQ are in addition to, and not a substitute for, the manufacturer’s recommendations and guides for their products. To ensure that you comply with the manufacturer’s current recommendations and guides please consult their literature prior to applying their products.Any warranty for use of these coatings is the responsibility of the manufacturer.
TIMBER EFFECT STAINS – THE CARBON WAREHOUSE GROUP
Stain systems are provided by The Carbon Warehouse Group – Adnan Diab 0452 452 727 – firstname.lastname@example.org.
Below are some examples for the stains that can be delivered, together with some Assembly & Finishing Guidelines